Please use this identifier to cite or link to this item:
Full metadata record
DC FieldValueLanguage
dc.contributor.authorBrown, Laura Grace-
dc.description.abstractMining-induced seismic events can be loosely classified as induced events or triggered events. Induced seismic events in mines are typically proportional to mining-induced stress change. This type of rock mass failure is often successfully managed by seismically active underground mining operations, and is generally considered part of a normal seismic response to mining. Triggered seismicity represents a disproportional seismic response to mining, and often results in visible rock mass damage. The variations in space and time characteristics of induced and triggered seismicity, particularly in relation to mine blasting, are indicative of distinct seismic source mechanisms and may be useful in seismic hazard evaluation for mines. In this work, Seismic Response Parameters (SRP's) are conceptualized using fundamental rock mechanics and mine seismicity principles, and subsequently supported with a comprehensive case study from Agnico Eagle's LaRonde mine. The primary factors considered in this thesis are space and time; how they relate a seismic response to the stimulus and how they relate individual events within a seismic response to the response itself. The four SRP's are: Distance to Blast, Time After Blast, Distance to Centroid and Time Between Events. A normalized set of SRP's, calculated with site specific considerations, are proposed as a meaningful measure of how likely a seismic response is to be induced or triggered by discrete mine blasting. Within this thesis, Seismic Response Rating (SRR), the summation of normalized SRP's, is presented as a means of quantifying seismic responses to mining with a single numerical value. Seismic responses at LaRonde mine are used to demonstrate the application of SRP's and SRR to real mine seismic data. A mine shutdown period, in which no mine blasting occurs, is used to provide meaningful insight into the spatial and temporal relations of mine seismicity. In the absence of mine blasting, seismic events associated with induced seismic source mechanisms cease to obscure triggered seismicity (resulting from triggered source mechanisms). Where and when both induced and triggered seismic source mechanisms interact in space and time, complex seismicity may be observed. An interpretation of complex seismic responses to mining, occurring in the transitional zone between induced and triggered seismicity, is also presented in this thesis.en_CA
dc.subjectcomplex seismicityen_CA
dc.subjectinduced seismicityen_CA
dc.subjectLaRonde Mineen_CA
dc.subjectmine blastingen_CA
dc.subjectseismic event locationen_CA
dc.subjectseismic event timeen_CA
dc.subjectseismic response parametersen_CA
dc.subjectseismic response to miningen_CA
dc.subjecttriggered seismicityen_CA
dc.subjectunderground miningen_CA
dc.titleQuantification of seismic responses to mining using novel seismic response parametersen_CA
dc.description.degreeDoctor of Philosophy (PhD) in Natural Resources Engineeringen_CA
dc.publisher.grantorLaurentian University of Sudburyen_CA
Appears in Collections:Doctoral Theses
Natural Resources Engineering - Doctoral theses

Items in LU|ZONE|UL are protected by copyright, with all rights reserved, unless otherwise indicated.